Teac BU-VR24 Instructions For Use Download Page 1

Z

BU-VR24

Battery unit

Instructions for Use

Introduction

Thank you for purchasing the BU-VR24 battery unit. Please read this document 
in its entirety before using the product to get the best performance and ensure 
safe and proper operation.

 

o

Company names and product names in this document are the trademarks or registered 
trademarks of their respective owners.

Included accessories

 

o

Connecting panel (right) × 1

 

o

Connection cable × 1

 

o

Connecting panel (left) × 1

 

o

Instructions for Use (this document) × 1

 

o

Connecting panel screws (M3×6/binding/silver) × 4

Important safety instructions

Model for USA

Declaration of Conformity

Model number: BU-VR24
Trade name: TEAC
Responsible party: TEAC AMERICA,INC.
Address: 10410 Pioneer Blvd. Suite #1, Santa Fe Springs, California 90670, U.S.A.
Telephone number: +1-323-726-0303
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) this device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired operation.

Information

This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio frequency energy and, 
if not installed and used in accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of this equipment in a residential area is 
likely to cause harmful interference in which case the user will be required to correct the 
interference at his own expense.

CAUTION

Changes or modifications not expressly approved by the party responsible for compliance 
could void the user’s authority to operate the equipment.

Model for Europe

This product complies with the European Directives request, and the other 
Commission Regulations.

Disposal of electrical and electronic equipment

(a)  All electrical/electronic equipment should be disposed of separately from the municipal 

waste stream via collection facilities designated by the government or local authorities.

(b)  By disposing of electrical/electronic equipment correctly, you will help save valuable 

resources and prevent any potential negative effects on human health and the environment.

(c)  Improper disposal of waste electrical/electronic equipment can have serious effects 

on the environment and human health because of the presence of hazardous sub-
stances in the equipment.

(d)  The Waste Electrical and Electronic Equipment (WEEE) symbols, which show 

wheeled bins that have been crossed out, indicate that electrical/electronic 
equipment must be collected and disposed of separately from household waste.

(e)  Return and collection systems are available to end users. For more detailed infor-

mation about the disposal of old electrical/electronic equipment and waste 
batteries/accumulators, please contact your city office, waste disposal service or the 

shop where you purchased the equipment.

WARNING

This is a Class A product. In a domestic environment, this product may cause radio inter-
ference in which case the user may be required to take adequate measures.

ATENCIÓN

Este es un producto de clase A. En un entorno no profesional, este aparato puede producir 
interferencias de radio, en cuyo caso el usuario será el responsable de tomar las medidas 
necesarias para solucionarlo.

AVERTISSEMENT

Il s’agit d’un produit de Classe A. Dans un environnement domestique, cet appareil peut 
provoquer des interférences radio, dans ce cas l’utilisateur peut être amené à prendre des 
mesures appropriées.

Warnung

Dies ist eine Einrichtung, welche die Funk-Entstörung nach Klasse A besitzt. Diese Einrichtung 
kann im Wohnbereich Funkstörungen versursachen; in diesem Fall kann vom Betrieber ver-
lang werden, angemessene Maßnahmen durchzuführen und dafür aufzukommen.

Model for Canada

Industry Canada’s Compliance Statement: This Class A digital apparatus complies with 
Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. 

Precautions for use

 

o

Do not use any battery other than the NP-L7S made by IDX Company, Ltd.

 

o

Incorrect battery handling could cause rupture, fire, smoke, heat or fluid leak-
age and could lead to reduced performance or malfunction. Always abide by 
the prohibitions in the battery owner’s manual.

 

o

Batteries (including products that contain them) should not be exposed to 
sunshine, fire or excessive heat.

 

o

Before changing the batteries, turn the VR-24 off. Furthermore, if a power 
cord is connected to the DC IN connector, disconnect it.

 

o

Always use batteries in sets of two.

 

o

Charge the batteries completely using the following battery charger before 
use: IDX JL-2PLUS.

 

o

If you want to dispose of this product, always remove the batteries. For battery 
disposal, follow the instructions in the battery owner’s manual.

 

o

The original side panels and stand feet attached to the VR-24 are not used 
with the battery unit. However, you should save them because they will be 
needed to use the VR-24 by itself when the battery unit is disconnected.

Assembly procedures

Remove the VR-24 side panels and stand feet.

The screws removed from the side panels will be used to attach the connect-
ing panels.

Media cover

Side panel (left)

Side panel (right)

Stand feet (front)

Stand feet (back)

Remove the media cover from the right side panel and 
attach it to the right side connecting panel.

Media cover

Remove the cover from the bottom of the unit and connect 
the included connection cable.

Cover

Connection cable

 

o

Attach the removed cover using the nearby screw threads. Tighten the 
screws with a torque of 60 N·cm (6 kgf·cm).

D01254910B

Reviews: