2
REMOTE CONTROL
1. SOURCE BUTTON
2. MUTE BUTTON
3. MEM BUTTON
4. CH- BUTTON
5. NUMERIC BUTTONS
6. BASS +/- BUTTONS
7. /- BUTTONS
8. STANDBY BUTTON
9. PAIR/PLAY/PAUSE BUTTON
10. MO/ST BUTTON
11. CH+ BUTTON
12. CLOCK BUTTON
13. SLEEP BUTTON
14. TUNING/SKIP/SEARCH UP/DOWN
BUTTONS
15. VOL +/- BUTTONS
POWER SUPPLY
Plug AC plug into the outlet socket on the unit for connecting the main power.
Note:
During playback, if not any operation in about 6 hours, the unit will switch to standby
mode automatically.
SLEEP TIMER SETTING
You can set the sleep timer at power on modes as following instructions:
Press SLEEP button on the remote control repeatedly to cycle through the sleep time
options:
90
➨
80
➨
70
➨
60
➨
50
➨
40
➨
30
➨
20
➨
10
➨
OFF
After the sleep time setting, you can play the unit freely. Once the sleep time is expired, the
unit will be switched off.
During playback, press SLEEP button once to check the remaining sleep time.
HOW TO SET TIME
In standby mode, press and hold CLOCK button on the remote until Hour flashes on the
screen with "CLK" shows on the screen; use TUNING UP/DOWN button on the remote to
adjust the hour and confirm your adjustment by pressing CLOCK button on the remote;
Minute starts blinking on the screen, press TUNING UP/DOWN button on the remote to set
the minute accordingly, press CLOCK button on the remote again to confirm your setting.
During playback, press CLOCK button to check the current time.
The time can only be set in standby mode.
BLUETOOTH OPERATING
This unit can receive stereo audio signal from a BLUETOOTH stereo audio source device.
1. Power on the unit, switch to BLUETOOTH mode by pressing SOURCE repeatedly.
2. LED indicator rapid blinking while it is pairing.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15