13
Basic operation
1
Press the standby/on (
¤
) button to turn the unit on.
2
Press the SOURCE button to select the input source.
Each time the SOURCE button is pressed, the source changes as
follows:
USB
HDMI (ARC)
LINE 2
Bluetooth
LINE 1
COAXIAL
OPTICAL
The indicator lights for the selected source.
o
The input source indicators blink when the input signal is a digital audio format (such as Dolby Digital, DTS or
AAC).
If this is the case, check to see if the connected digital audio output device has a “PCM” setting for the digital
output format. Refer to the operation manual for that device to make this setting.
o
When using this unit with a Windows computer, before setting this unit to USB and playing back audio files on
the computer, you must install the dedicated driver on that computer (page 19).
3
Operate the audio output device.
Refer to the operation manual of the audio output device that you
are using.
4
Adjust the volume.
Turn the VOLUME knob or use the VOLUME buttons on the remote
control to adjust the volume to the appropriate level.
