27
Amplifier Section
Maximum power output
20 W + 20 W (JEITA 10%, 1 kHz, 8 Ω)
40 W + 40 W (JEITA 10%, 1 kHz, 4 Ω)
Rated power output
15 W + 15 W (JEITA 1%, 1 kHz, 8 Ω)
28 W + 28 W (JEITA 1%, 1 kHz, 4 Ω)
Total Harmonic Distortion . .0.01% (1 kHz, 8 Ω, 1W)
Signal-to-noise ratio
LINE IN . . 95 dB (IHF-A/LPF 20kHz 1kHz 2V input)
Frequency Response . . . .2 Hz – 100 kHz (–5 dB)
Digital audio input
Coaxial digital jack (75Ω) × 1 . . . . . . . . . . . 0.5 Vp-p
Optical digital connector × 1
− 24.0 to − 14.5 dBm peak
USB port (type B) connector . . . . . . . . . . . .USB 2.0
Supported sampling frequencies (PCM)
32/44.1/48/88.2/96/176.4/192 kHz
(96kHz maximum when using optical digital input)
Supported bit lengths . . . . . . . . . . . . 16/24 bits
Supported sampling frequencies (DSD)
2.8/5.6 MHz
(only when connected by USB)
Bluetooth
Bluetooth version. . . . . . . . . . . . . . . . . . . . V2.1+EDR
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 2
Supported profiles . . . . . . . . . . . . . . . . A2DP, AVRCP
Headphones output
Rated output . . 100 mW~100 mW (32 Ω, 1 kHz)
Total harmonic distortion . . . . . . . . . . . . . . . 0.005%
Specifications
o
Design and specifications are subject to
change without notice.
o
Weight and dimensions are approximate.
o
Illustrations may differ slightly from produc-
tion models.
General
Power supply
Model for Europe . . . . . . . . . . . .AC 230 V, 50 Hz
Model for USA/Canada . . . . . .AC 120 V, 60 Hz
Power consumption . . . . . . . . . . . . . . . . . . . . . . 38 W
External dimensions (W × H × D)
215 × 61 × 254 mm
(8 3/8” × 2 3/8” × 10”)
(including protrusions)
Weight . . . . . . . . . . . . . . . . . . . . . . . . .2.1 kg (4 5/8 lb)
Operating temperature . . . . . . . . . .+5°C to +35°C
Operating humidity . . . . . . . . . . . . . . . . 5% to 85%
(no condensation)
Storage temperature . . . . . . . . . . .−20°C to +55°C
Accessories
Power cord × 1
Remote control unit (RC-1313) × 1
Batteries for remote control (AAA) × 2
Owner’s manual (this document) × 1
