Teac AG-10D, Service Manual

Page: 7 / 50

− 7 −
Pin No. Symbol Description
46 T_MUTE Output for tuner mute. (At "L", it is active.)
47 SR_MUTE Output for surround channel mute. (At "L", it is active.)
48 SW_MUTE Output for sub woofer channel mute. (At "L", it is active.)
49 C_MUTE Output for center channel mute. (At "L", it is active.)
50 F_MUTE Output for front channel mute. (At "L", it is active.)
51 VIDEO_S2 Video select 1,2,3
52 VIDEO_S3 Video select 1,2,3
53 CINEMA ,EQ Output for cinema eq (At "H", it is active.)
54 DSP_MUTE Output for DSP mute. (At "L", it is active.)
55 CS49326RST Reset signal output to CS4926.
56 ROM2 Signal output to M27W201 .
57 ROM30 Signal output to M27W201 .
58 ROM3 Signal output to M27W201 .
59 AUTOBOOT Output for DSP AUTOBOOT
60 SUB SUM Output for sub woofer Summing. (At "L", it is active.)
61 SC_MUTE Output for center channel mute. (At "L", it is active.)
62 SPK RELAY Output for Speaker Relay ON/OFF (At "H", it is active.)
63 CONT 2506 Output for NJM 2506 IC
64 OSD CE Output for chip enable of M35010 OSD IC
65 OSD CLK Output for clock of M35010 OSD IC
66 OSD DATA Output for data of M35010 OSD IC
67 CS 4112 Chip select signal output to AK4112
68 POWER LED2 Output for POWER LED Dimmer.
69 STANDBY LED/RELAY/POWER LED Output to ST/BY LED, STBY Relay and POWER LED. (At "H", it is active.)
70~85 S1~S15 GRID FL PORT
86 N.C Not used!
87 N.C Not used!
88 N.C Not used!
89 VDD +5V power supply.
90 N.C Not used!
91~100 G1~G10 GRID FL PORT