2
TEAC USB HS Audio Driver Install Guide
Confirming the driver has been correctly
installed
Follow the below steps to confirm the driver is properly recognized by the
computer.
Play back some music using iTunes or another music
application. The driver is recognized by the computer in
this step.
Double click "System Info" in "Applications" > "Utilities" in the
finder menu.
Click the "System Extensions" in the "Software" tab, and check
"TEAC USB Audio".
If it shows "Loaded: Yes", the computer is correctly recognizing
the driver.
If it shows "Loaded: No" and random noise is heard from the speakers/
headphones, restart the computer and go through the above steps again. If
it still says "No", please install the driver again.
Installing the driver
(continued from page 1)
Click "OK" after checking the box "Legacy Developer: Teac"
The following steps apply to all versions of compatible OS.
Connect the TEAC product to the Mac via a USB cable, then
click “Sound” in System Preferences.
Select “TEAC USB HS ASYNC AUDIO DEVICE” in the “Output”
tab.
The installation is now completed.
To check the driver was properly recognized by the computer, follow the
steps in the following section.
7
1
2
3
8
9
Note
Note
