408-2363
Rev K
5
of 5
b. Jaws grasp the NO-GO element.
If above conditions are met, the ratchet is performing satisfactorily. If not, see Section 5,
REPLACEMENT AND REPAIR.
3. Re-install the dies, and secure them with the roll pins.
5.
REPLACEMENT AND REPAIR
Customer-replaceable parts are listed in Figure 6. A complete inventory should be stocked and controlled to
prevent lost time when replacement of parts is necessary. Parts other than those listed should be replaced by
TE Connectivity to ensure quality and reliability. Order replacement parts through your representative, or call 1-
800-526-5142, or send a facsimile of your purchase order to 717-986-7605, or write to:
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
For customer repair service, contact a representative at 1-800-526-5136.
6.
REVISION SUMMARY
Changed text in title and INTRODUCTION.
REPLACEMENT PARTS
ITEM
PART NUMBER
DESCRIPTION
QTY PER TOOL
1
21045-3
RING, Retaining
4
2
1-23619-6
PIN, Retaining
2
3
2-23620-9
PIN, Retaining
1
4
21045-6
RING, Retaining
22
5
39364
SPRING
1
6
1-21919-1
PIN, Dowel
1
7
6-21028-8
PIN, Roll
2
8
305956-8
ANVIL, Die
2
Figure 6
63.5 [2.50]
279 [11]
12.7 .50]
Weight 404 g [13 oz]
8
7
5
1
2
3
4
6
