409--10053
Customer Manual
SDE Battery Powered Crimp
1
of 8
LOC B
E
2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
TE logo is a trademark.
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.
TOOLING ASSISTANCE CENTER
1--800--722--1111
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
www.te.com
23 MAR 11 Rev H
Tool Kit 1725837- [ ]
READ THIS FIRST !
2
. . . . . . . . . . . . . . . . . . . . . . . . .
SAFETY PRECAUTIONS
1. INTRODUCTION
5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. RECEIVING/INSPECTION
5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. INSTALLATION/REMOVAL OF SDE CRIMP DIES
5
. . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1. Installation of SDE Crimp Dies
6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2. Removal of Shouldered Dies
6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. OPERATION
7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1. Battery Installation and Removal
7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2. Operation of the SDE Battery Powered Crimp Tool
7
. . . . . . . . . . . . . . . . . . . . . . .
5. PREVENTIVE MAINTENANCE
7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1. Daily Maintenance
7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2. Yearly Maintenance
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6. SPARE PARTS
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7. TROUBLESHOOTING
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8. RETURN/REPAIR
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9. REVISION SUMMARY
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-- -- -- --
Safeguards are designed into this application equipment to protect operators
and maintenance personnel from most hazards during equipment operation.
However, certain safety precautions must be taken by the operator and repair
personnel to avoid personal injury, as well as damage to the equipment. For best
results, application equipment must be operated in a dry, dust--free environment.
Do not operate equipment in a gaseous or hazardous environment.
Carefully observe the following safety precautions before and during operation of
the equipment:
D
ALWAYS wear appropriate ear protection.
D
ALWAYS wear appropriate eye protection.
D
ALWAYS wear approved eye protection when operating powered equipment.
D
ALWAYS keep guard(s) in place during normal operation.
D
NEVER wear loose clothing or jewelry that may catch in moving parts of the
application equipment.
D
NEVER insert hands into installed application equipment.
D
NEVER alter, modify, or misuse the application equipment.
ORI
G
INAL
IN
STRUCTI
O
NS
