Doc. No: 411-121018
Printhead setup instructions for the
TE3124, TE3112 & T6112DS
Issue: 1
Date: Oct 2012
Author: I Ridgeway
Print date: 24-Oct-12
Issue date:
: Oct 2012
Page: 2 of 8
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
2. Printhead set up
2.1. Toggle Position -
place the pressure toggles (Figure 1) on the edges of the
printable area.
Figure 1 - Pressure toggles setup for print area of product to be printed.
Incorrect alignment of pressure toggles can give poor print quality, see Figure 2.
Position of pressure toggles should be optimised for the material printed and is
dependant on width on material printed.
The pressure toggles may be tightly clamped to the printhead locking bar so
movement may be restricted. In this instance loosening the grub screws a quarter
turn (see Figure 3) will aid movement. If grub screws loosened, re-tighten when
pressure toggles positioned in correct location.
Aligned to
print area
Pressure
toggles
