Doc. No: 411-121018
Printhead setup instructions for the
TE3124, TE3112 & T6112DS
Issue: 1
Date: Oct 2012
Author: I Ridgeway
Print date: 24-Oct-12
Issue date:
: Oct 2012
Page: 1 of 8
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves
the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled
1. Introduction
The aim of this document is to provide instruction for setting up the Printhead of the TE
Connectivity (TE) thermal transfer (TT) printers TE3124 (CC9352-000), TE3112 (CR2120-
000) and T6112DS (CP8122-000) to give an optimum print performance.
The range of products printed on the TE thermal transfer printers TE3124, TE3112 and
T6112DS vary in width and thickness. There is
NO
universal adjustment to cover every
TE product. It may be necessary to adjust the toggles and printhead for each product
printed.
Note:
Thermal transfer Printheads can be damaged by electrostatic discharge or over
current. When ever electrically disconnecting the printhead, the power supply must be
disconnected and allowed to dissipate for at least 1 minute.
The printhead surface can be physically damaged and so must be treated with care. Tools
must not be used on the printhead surface and only the recommended cleaners (TE
–
Thermal Transfer [TT] Printer cleaning Kit CP5431-000) are to be used to clean
printheads.
The information contained within this document is the property of TE Connectivity. It is supplied in
confidence and the commercial security of the contents must be maintained. It must not be used for any
purpose other than that for which it is supplied nor may any information contained in it be disclosed to
unauthorised persons. It must not be reproduced in whole or in part without obtaining written permission
from TE Connectivity.
