Instruction Sheet
PRO- CRIMPER* III Hand
Crimping Tool Assembly 58546- 2
408--8678
LOC B
1
of 6
E
2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
TE logo is a trademark.
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.
TOOLING ASSISTANCE CENTER 1--800--722--1111
PRODUCT INFORMATION 1--800--522--6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
www.te.com
17 Mar 11 Rev C
with Die Assembly 58545- 1
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume
applications. A wide selection of powered application equipment for extended--use, production operations is available.
The PRO--CRIMPER III Hand Crimping Tool is a “Commercial” grade tool
and is designed primarily for field installation, repair, maintenance work, or
prototyping in industrial, commercial, or institutional applications. Product
crimped with this tool will meet the crimp height requirement for hand tools in
the appropriate 114 series specification, but may not comply with other feature
parameters of the specification. TE offers a variety of tools to satisfy your
performance requirements. For additional information, contact the Tooling
Assistance Center at 1--800--722--1111.
Front of Tool
Die Assembly
Moving Jaw
Ratchet
Adjustment
Wheel
Moving
Handle
Stationary
Handle
PRO--CRIMPER III Hand
Crimping Tool Frame
354940--1 (408--9930)
Pivot Pin
Back of Tool
(Wire Side)
Stationary Jaw
Wire
TE Die Assembly
Product Family
}
Size
(AWG)
Strip Length
(mm [In.])
SOLISTRAND* Terminal (Standard)
22--14
4.37--5.16 [.172--.203]
58545 1
SOLISTRAND Terminal (Standard) and
Butt Splice
12--10
6.35--7.14 [.25--.281]
58545--1
SOLISTRAND Terminal (Long Barrel) or
Butt Splice
22--14
6.35--7.14 [.25--.281]
SOLISTRAND Terminal Parallel Splice
22--14
7.94--8.73 [.312--.344]
}
Contact the Tooling Assistance Center or Product Information (at the number listed below) for specific terminal and splice part numbers.
Figure 1
1. INTRODUCTION
PRO--CRIMPER III Hand Crimping Tool Assembly
58546--2 consists of Die Assembly 58545--1 and
PRO--CRIMPER III Hand Crimping Tool Frame
354940--1. The tool is used to crimp the terminals and
splices onto the wire size listed in Figure 1.
Read these instructions thoroughly before crimping
any terminals or splices.
Dimensions on this sheet are in millimeters [with
inch equivalents provided in brackets]. Figures
are for reference only, and are not drawn to scale.
ORI
G
INAL
IN
STRUCTI
O
NS
NOTE
i
