@2020 TE Connectivity family of companies
All Rights Reserved
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks
Completed form is TE confidential information
Safety, Handling and Use:
Important safety information for LEMBAS USB Modem
(the “device”)
WARNING: Failure to follow these safety, handling and use instructions could result in personal injury,
damage to the LEMBAS USB Modem, or prevent proper performance of this device. Read all the safety,
handling and use information before using this device.
The LEMBAS USB Modem is a complete assembly, ready for use. No assembly is required. Remove from
packaging and use as instructed. Do not disassemble this device. Disassembly may damage the device or
prevent proper performance of the device. Disassembly may also cause personal injury to the user.
Disassembly of the LEMBAS USB Modem will void the Limited Warranty.
Handle the LEMBAS USB Modem with care. It is made of metal and plastic and has sensitive electronic
components inside. This device can be damaged if dropped, bent, punctured, struck or crushed, or if it
comes in contact with liquid. Keep this device dry and use and store in a cool dry place.
If you suspect damage to the LEMBAS USB Modem, do not use the device. Use of the device when
damaged may cause electric shock, overheating and/or personal injury.
Do not use the LEMBAS USB Modem if it has come in contact with liquid until the device has fully dried.
Moisture in the device may cause electric shock and personal injury, and may also prevent proper
performance of the device. Allow the device to thoroughly dry before further use. Do not attempt to dry
the device using an external heat source or by inserting an absorbent material into the device.
The LEMBAS USB Modem is intended for use with a Single Board Computer (“SBC”) and to
obtain its power
from the SBC. Do not attempt to power the device from an electrical outlet or other USB-A or USB-C
connection to any power source other than the SBC. If you do, the LEMBAS USB Modem may overheat
resulting in personal injury or damage to the device.
The recommended current rating for the LEMBAS USB Modem is 2.5 to 3.0 amps. Do not connect this
device to any power source in excess of 5.5 volts DC, which is the maximum voltage input for the device.
If you do, the LEMBAS USB Modem may overheat resulting in personal injury or damage to the device.
The LEMBAS USB Modem is packaged with an original USB-A to USB-C cable assembly. Make sure to use
only the original USB-A to USB-C cable assembly or other third party USB-IF certified USB-A to USB-C cable
assembly. If you do not, you may damage the device. For more information, contact TE Customer Service
via
https://www.te.com/usa-en/product-2195873-1.html
or one of TE authorized distributors in which
you purchased the device from.
Do not use any commands with the LEMBAS USB Modem other than the commands instructed for
software installation and set-up of the device. Using other commands/modes for the LEMBAS USB
Modem, may result in overheating and personal injury and the device may be damaged or otherwise not
properly perform.
The LEMBAS USB Modem is designed to work in ambient temperatures between 32°F and 122 °F (0°C and
50°C) and stored in temperatures between -4°F and 140°F (-20°C and 60°C). Use or storage of the LEMBAS
USB Modem outside these operating parameters may damage the device and/or prevent the proper
performance of the device.
Use LEMBAS USB Modem in an environment within the ranges specified in the Product Specifications.
Failure to do so may result in personal injury, damage to the device, and/or prevent proper performance
of the device.
