409-35009
Rev E
15 of 44
OPERATION
4.1.
Control panel
HF-20 Terminator
The HF-20 Terminator includes a membrane keypad and display screen for operator control of the
terminator. Operation of the machine using the membrane keypad is described in section 4.2. On HF-
20 terminators equipped with an optional Crimp Quality Monitor (CQM) kit, terminator operation is still
controlled using the membrane keypad.
HV-20 Terminator
1. If a die holder with an automatic (pneumatically operated) cable clamp is to be used in the HV-20
terminator, select the Automatic Cable Clamp Installed button from the setup dialog (Figure 12).
Figure 12: Automatic Cable Clamp Installed button
2. In the options dialog, enable or disable Crimp Quality Process Monitoring.
To enable CQM, select the
Use CQM
radio button (Figure 13).
To disable CQM, ensure that the
Use CQM
radio button is not selected.
Figure 13: Enabling Crimp Quality Process Monitoring
