ADCP-92-159 • Issue 1 • 2/2015
Page 21
© 2015, Tyco Electronics Corporation
Figure 25. Routing Pigtails from Left Side (Top View)
3. As the pigtail adapter packs are installed, route the fibers within the splice trays. The
stranded fibers fill in 48 to a splice tray, The ribbon pigtails fill in 96 fibers per splice tray.
shows the routing for stranded pigtails within the splice tray.
shows
the routing for ribbon pigtail.
Figure 26. Mass Fusion Heat Shrink Splice Tray Cable Routing
Note:
In all cases pigtails are wound in a clockwise direction with one full loop of slack
within the splice tray. All pigtails enter the splice tray at the bottom right, as shown.
Note:
When mass fusion splice chips are used (ribbon cable), the bottom splice tray can be
used for slack.
PIGTAIL
25737-A
25799-A
BARE
FIBER
LACING
JACKETED
FIBER
