5375 (08/13)
411-121100
INSTRUCTION
CLASS 1- Public
© 2021 TE Connectivity Ltd. family of companies.
All Rights Reserved.
| Indicates Change
TE Proprietary & Confidential Information
Class I Data Classification - See Policy TEC-02-04
9 of 15
Rev [1]
8 October 2021
Placing
the
support
plates
(fixtures)
on
the
Plotter
There are four pin stops on the plotting area where up to two different support plates can be
loaded. Different support plates are available depending on the size of the marking elements.
They can occupy one or two segments on the plotting area.
Dif
ferent sized support plates (fixtures) as samples below:
1 segment
2 segments
Placing
the
elements
in
the
support
plates
Choose the appropriate support plate for the elements to be labelled and insert the elements
carefully into the support plate. You can also add the element
s first and then place the support
plate on the plotter.
Please note:
The plotter always re-
calibrates prior to first plotting.
