RBK-X1C
PN 2376800-1
Page 26 Rev. A Dec. 2020
3.11
Circle Test
This is a testing interface, which was designed to test the RBK-X1C to run cycle in 500
o
C/0.2S for 60 min.
So as to make sure machine work well before leaving factory.
To start the circle test:
1. Switch
to
.
2. Edit the test time if need on
, default value 60 min.
3. Press and hold on both start button, then test cycle will start.
4. When time discount from 60 min to 0, test cycle will stop automatically.
5.
will show the total cycle the machine has operated in 60 min.
6. Switch
to
, exist editing.
7. Click on
, to back to main interface.
3.12
I/O & Manual
This is an I/O page when input signal from those action.
1.
When pressing on left start button, this icon will illuminate green.
2.
When pressing on right start button, this icon will illuminate green.
3.
When pressing on E-stop button, this icon will illuminate green.
Summary of Contents for 2376800-1
