12-Port GIGABIT MANAGED PoE
SWITCH QUICK INSTALLATION GUIDE
INSTALLATION
The device can be fixed to the wall. Follow the steps below to install the device on
the wall.
Step 1
: Hold the device upright against the wall
Step 2
: Insert four screws through the large opening of the keyhole-shaped aper-
tures at the top and bottom of the unit and fasten the screw to the wall with a screw
driver.
Step 3
: Slide the device downwards and tighten the four screws for added stability.
PANEL LAYOUTS
WIRING
For pin assignments please refer to the instructions below:
Grounding
Grounding and wire routing help limit the effects of noise due to electromagnetic in-
terference (EMI). Run the ground connection from the grounding pin on the power
connector to the grounding surface prior to connecting devices.
Power port pinouts
The 2352901 series uses the M23 5-pin female connector on the front panel for the
dual power inputs.
Step 1
: Insert a power cable to the power connector on
the device.
Step 2
: Rotate the outer ring of the cable connector until
a snug fit is achieved. Make sure the connection is tight.
Console port pinout
V1+
V1-
V2+
V2-
Pin
No.
Description
Pin
No.
Description
1
BI_DC+
5
BI_DB+ / PoE Vout-
2
BI_DD+
6
BI_DA+ / PoE Vout+
3
BI_DD-
7
BI_DC-
4
BI_DA- /POE Vout+
8
BI_DB- / PoE Vout-
Relay
NC
NC
NC
M12 A-Code Ethernet ports
Relay output ports pinouts
The switch uses the M12 A-coded 5-pin female
connector on the front panel for relay output. Use
a cable with an M12 A-coded 5-pin male connector
to connect the relay. The relay contacts will detect
user-configured events and form an open circuit
when an event is triggered.
-1 and -4
1
Reset Button
2
Power1 status LED
3
Power2 status LED
4 R.M. Status LED
5
Ring Status LED
6
Fault LED
7
Power Connector
8
Non-PoE Gigabit Ethernet
ports (with bypass)
9
PoE enabled Gigabit ether-
net ports
10 Link/ACT LED for non-PoE
enabled Gigabit ports
11 Speed LED for non-PoE
Gigabit ports
12 Link/ACT LED for PoE ena-
bled Gigabit ports
13 PoE Indicator for PoE ena-
bled Gigabit ports
14 Speed LED for PoE enabled
Gigabit ports
15 Console port
16 Relay output port
1
6
5
4
3
2
7
8
9
10
11
14
13
12
16
15
1
7
2
8
3
4
5
6
