Page 2
MICROgarde controller I and II
04.20.11.18
1
Introduction
Thank you for purchasing your TDSi MICROgarde door access control system.
There are 2 main types of MICROgarde controller (often referred to as MG controllers) the
MICROgarde I and MICROgarde II. MICROgarde I is a 1-door controller with connections for
1-2 readers. MICROgarde II is a 2-door controller with connections for up to 4 readers.
The controllers can operate independently or as part of a networked system all administered
from a single computer (PC) using EXgarde software. In addition, spare inputs and relays
are available for monitoring and control of other equipment.
MICROgarde’s key features are:
One- or two-door access control unit
Network to 200 other MICROgarde units
Up to 800 TDSi or 400 third-party readers
Built-in RS-232/RS-485 converter
Reversible 2-wire RS-485 communication
Variable lock times
Diagnostic LEDs
Additional I/O and TCP/IP modules available
Automatic fire door release
(not to be used as the primary method of releasing fire doors)
Full compatibility with EXgarde PRO providing an easy upgrade path for enhanced
functionality
Intuitive software
Automated database backup
Custom reporting feature
This manual will guide you through the installation of MICROgarde I & II controllers (with or
without integral power supply).