19
13.
How to Use the Reset Buttons
SW1: Hardware Reset
1.
Turn off power
2.
Press switch down while returning power to unit
3.
Hold down the switch button until the Extension bus blue LED is on (approximately
10 seconds)
4.
Release the switch
SW2: Restore factory network settings
1.
Turn off power
2.
Press switch down while returning power to unit
3.
Setting the network mode
a.
For static IP mode: Release the switch at the first flashing of the extension
bus blue LED (approximately 5 seconds)
b.
For DHCP mode: Release the switch after second flashing of the extension
bus blue LED. Please Note: GARDiS 4 Door Controller will flash red.
