C PRO 93165 SISSY SQUAT
ASSEMBLY INSTRUCTIONS
THIS UNIT REQUIRES (2) 9/16 WRENCH AND (2) 3/4 WRENCH FOR ASSEMBLY. DO NOT
TIGHTEN HARDWARE UNTIL INSTRUCTED TO.
1. PUSH (4) PLASTIC FOOT ONTO FRAME.
2. ATTACH UP RIGHT AND FOOT PLATE TO FRAME WITH (4) 1/2 x3 1/2 BOLT, (8) ½ FLAT
WASHERS AND (4) 1/2 LOCKNUT. SET UNIT ON LEVEL SURFACE AND TIGHTEN HARDWARE.
3. INSTALL (1) TURN POP PIN AND (1) HAND KNOB INTO UPRIGHT. ATTACH CUSHION TO
CUSHION MOUNT WITH (4) 3/8x2 BOLTS AND (4) 3/8 FLAT WASHERS FINGER TITE. CENTER
CUSHION ON CUSHION MOUNT AND TIGHTEN HARDWARE. DO NOT OVER TIGHTEN. INSERT
CUSHION MOUNT INTO UPRIGHT AND SET HEIGHT WITH TURN POP PIN AND HAND KNOB.
4. INSTALL (1) TURN POP PIN AND (1) HANDKNOB INTO TUBE ON FRONT OF FRAME. PUSH
BAR THRU INSERT. PUSH (2) 4x8 CUSHIONS ONTO BAR, PUSH (2) CUSHION CAPS ONTO BAR.
PLACE INSERT INTO TUBE AND SET LENGTH WITH TURN POP PIN AND HAND KNOB.
HARDWARE LIST:
(4) 3/8x2 BOLTS
(8) 3/8 FLAT WASHERS
(4) 1/2 x31/2 BOLTS
(8) 1/2 FLAT WASHER
(4) 1/2 LOCKNUT
(2) TURN POP PIN
(2) HAND KNOB
(4) FOOT
(2) CUSHION CAP