ASSEMBLY: You need two people since the unit requires perfect
positioning and markings on the beam.
Attach (1) Chin Bar to (2) Uprights with (2) 3/8” x 3” Hex bolts, (4) 3/8”
Flat Washers and (2) 3/8” lock nuts. Hold the assembled bar to a strong
wooden beam and then mark holes on the beam with a marker.
Drill (4) pilot holes into the beam using (3/16”) drill into the beam
from bottom position and then insert (4) 3/8” x 3” Lag bolts. Do not
over tighten. Check the Chin Bar and Two Uprights positioned for 90
degree.
Attach (2) Handles to (2) Uprights with (4) 3/8” x 3” Hex bolts, (8) 3/8”
flat washers and (4) 3/8” lock nuts.
Check again the Chin Bar and Two Uprights well positioned for 90
degree.
Then tighten all bolts before you start your exercises.
CAUTION: Check the hardware every time, before you start using this
Chin Bar to avoid injury
HARDWARE:
3/8” X 3” BOLTS - 6 PCS
3/8” X 3” LAG BOLTS - 4 PCS
3/8” FLAT WASHERS - 16 PCS
3/8” LOCK NUTS - 6 PCS
