background image

Read this disclaimer and instructions thoroughly before operating this device. 

THE USE OF THIS PRODUCT IS A SIGN OF YOUR COMPLIANCE WITH 

THIS DISCLAIMER. You are responsible for your own actions, behavior, and 

conduct while using this device. You agree to use this product in such a way 

that you will comply with all local and federal regulations, including, but not 

limited to, personal privacy laws. Tenergy Corporation will not be held liable for 

any damages or legal responsibilities resulting from the use of this product. 

This product is NOT suitable for anyone under the age of 14.

Safety guidelines for sUAS recreational users

- Follow community-based safety guidelines, as developed by organiza-

tions such as the Academy of Model Aeronautics (AMA).

- Fly no higher than 400 feet and remain below any surrounding obstacles 

when possible.

- Keep your sUAS in eyesight at all times, and use an observer to assist if 

needed.

- Remain well clear of and do not interfere with manned aircraft operations, 

and you must see and avoid other aircraft and obstacles at all times.

- Do not intentionally fly over unprotected persons or moving vehicles, and 

remain at least 25 feet away from individuals and vulnerable property.

- Contact the airport and control tower before flying within five miles of an 

airport or heliport.

- Do not fly in adverse weather conditions such as in high winds or reduced 

visibility.

- Do not fly under the influence of alcohol or drugs.

- Ensure the operating environment is safe and that the operator is compe-

tent and proficient in the operation of the sUAS.

- Do not fly near or over sensitive infrastructure or property such as power 

stations, water treatment facilities, correctional facilities, heavily traveled 

roadways, government facilities, etc.

- Check and follow all local laws and ordinances before flying over private 

property.

- Do not conduct surveillance or photograph persons in areas where there 

is an expectation of privacy without the individual’s permission (see AMA’s 

privacy policy).

- Before each flight, check and ensure the drone and controller are not 

damaged, and that all components are working in accordance with the user 

instruction .

- If you want to use unmanned aircraft systems for a commercial purpose: 

you can apply for an exemption from the FAA to operate commercially. For 

more information about how to apply for an exemption, visit the FAA’s 

“Section 333”.

DISCLAIMER

FLY RESPONSIBLY

The Federal Aviation Administration requires registration of many drones flown in the US, for hobby or commercial 

purposes. To learn more about drone registration requirements, visit "Know Before You Fly" at: 

www.knowbeforeyoufly.org

Summary of Contents for Phoenix Mini





















Reviews: