4. Using a screw driver, lift on the lower corner of the battery assembly and rotate upwards. The battery will not lift straight up.
5. Lift the battery out.
6. Using fingers or a needle nosed pliers, unplug the connector.
Page 1: ...ar of the unit in the OFF position before beginning the replacement 1 Place the unit on its left side Using a T 5 Torx driver remove the four screws holding the battery cover plate 2 Place the unit up...
Page 2: ...a screw driver lift on the lower corner of the battery assembly and rotate upwards The battery will not lift straight up 5 Lift the battery out 6 Using fingers or a needle nosed pliers unplug the con...
Page 3: ...and replace the battery cover 9 Reinstall the four retaining screws Proper disposal of the old battery is essential from an environmental and safety point of view Please follow local regulations for p...
