TDK-Lambda PHV Series, Operator'S Manual, Page: 19 / 38

16
83550001 Revision C
5. CONTROLS, INDICATORS, CONNECTORS
5.1. Front Panel Layout
The PHV series power supply is equipped with a fully instrumented front panel featuring
output voltage/current controls, voltage and current metering, and comprehensive status
LEDs, along with local/remote mode switch
(1)
, and power on switch. The PHV can be
operated locally from the front panel or remotely
(1)
via an optional remote interface located on
the rear panel. Typical front panel layout of the PHV power supply is shown in Figure 1
below, with the functions outlined in Table 3.
Figure 1. PHV Front Panel Controls and Indicators
Note 1
– The remote interface is an optional feature that must be specified at the time of
ordering.
12 21 13 18 20 14 15 16 17 19 22 23
1 10 11 7 3 4 5 6 8 9 2