DTM70, DTM70-C8 Manual
External AC-DC Power Adapters, 70W
1. P
RODUCT
D
ESCRIPTION
With the two series DTM70 and DTM70-C8 TDK-Lambda offers compact 70W medical AC-DC power adapters.
Both, the DTM70 as a Class I version with protective earth on the input and the DTM70-C8 as Class II version
with double insulated protection uses a robust desktop housing with the dimensions of only 120 x 52 x
31mm. Both series are members of the DTM family, whose devices are available in various power classes
between 36W and 300W.
The two power adapter series are suitable for 2MOPP medical as well as for general industrial applications.
The DTM70-C8 also has an IEC 60601-1-11 approval, making it ideal for medical, clinical and home
healthcare applications.
All devices are approved for installation altitudes up to 5000m and EMC is tested according to IEC/EN 60601-
1-2 Ed 4.
Both series are available with 12V, 15V, 18V, 24V, 36V and 48V output voltage.
Due to the high efficiencies and the low no-load losses, the devices are compliant with EU Regulation
2019/1782 (Ecodesign requirements for external power supplies) and the US DoE Level VI specification.
Special features are the compact design, achieved by the high efficiency and the standard locking DIN output
connector, which prevents unintentional output voltage disconnection. Other connector versions and cable
assemblies are available on request.
Safety is assured by IEC/UL/CSA/EN 60601-1 and EN 62368-1. CE and UKCA markings confirm compliance
with the low voltage, EMC and RoHS directives.
2. P
RODUCT
F
EATURES
-
Small in size, only 120 x 52 x 31mm
-
Protection Class I for DTM70 and Class II for DTM70-C8
-
IEC/UL/EN 60601-1 - 2MOPP approved
-
4400Vac Input to output isolation
-
IEC/EN 60601-1-2 Ed 4 (EMC) tested
-
IEC/EN 60601-1-11 home healthcare approval for DTM70-C8
-
IEC/BS/EN 62368-1 (I.C.T.) compliant
-
Temperature range -30 to +60°C (with derating)
-
AC 100-240V universal input voltage
-
Locking output connector
-
Operating altitude up to 5000m
-
High efficiencies up to 91%
-
Low no-load power consumption <150mW
-
Compliant with EU Regulation 2019/1782 (ecodesign for external power supplies)
-
Meets US DoE Level VI specifications
All parameters are typical values specified at nominal input voltage, nominal output load, 25°C ambient and after a 5 minutes run-in time unless
otherwise noted. The information presented in this document is believed to be accurate and reliable and may change without notice.
For additional information, please visit
https://product.tdk.com/en/power/dtm
2/13
DOC-ID: 260932 – Issue 1
