background image

 
 
 
U L T R A F L E X   H D   P D U   U S E R   M A N U A L  

 
 

3.9.2

 

LED Indicators & Alarm outputs 

LED indicators are provided on the interface PCB for AC available, Main power on, 48V DC on, and power 
supply status.  LED’s for AC available, Main power on and 48V DC on are also provided on the front of the 
PDU.  Alarm outputs are also provided for AC available, Main power on and 48V DC on connector J71.  Refer 
to 

Figure 22

 for a view of the LED indicators and alarm output connector J71 on the rear of the PDU. 

 

3.9.2.1

 

Alarm output connector J71 

The alarm output connector is J71 and is a 9-pin D-sub connector.  These alarm outputs can be used for 
external LED’s.  Refer to 

Table 14

 below for the pinout on J71.  The alarm outputs are open collectors as 

shown in 

Figure 23

.  Logic level for all alarms is TTL high = Normal, TTL low = Fault.  The maximum 

recommended current through the transistor is 50mA. 
 

Pin Number 

Signal 

1 AC 

Available 

2 Not-Used 

Main Power On 

48V DC On 

5 Not-Used 
6 AC 

Available 

return 

7 Not-Used 

Main Power On return

48V DC On return 

Table 14 – J71 Pinout 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Figure 23 – Alarm output (typical for all alarms) 

 
 
 

708401 Rev B 

Page 30 of 38 

Summary of Contents for UltraFLEX HD








































Reviews: