11
Attach the Rear Wheels
2
7
4
5
6
Driving Wheel
Rear axle (11)
Rear bottom view
1. Slide a Driving wheel (2) onto the Rear axle (11)
2. Slide the Ø12 Washer (7) onto the Rear axle.
3. Tighten a Lock nut (4) to the end of the Rear axle with a spanner.
4. Insert a Split pin (5) into the hold at the end of the Rear axle.
HINT: An extra spanner has been provided to hold the Lock Nut on the other side of
the rear axle while tightening the Lock Nut on the other side.
5. Repeat steps 1-4 on opposite side
6. Fit the Hubcaps (6) to both Driving wheels.