3 Piece High Bar Set
4
Item #21946
3 Piece High Bar Set
Item #21946
5
Customer
Service
1-800-599-8898
Customer
Service
1-800-599-8898
Step 1:
Turn Table (A) upside down and lay it on the ground. Insert two
Screws 1/4”x13mm (D) with Washers (G) through the screw holes at
the end of Leg (B) {see fig. 1} and into the rim of Table (A). It is advised
to keep all parts loose until assembly is complete. Follow these steps
for the three remaining Legs (B) at each side of the Table (A).
B
B
B
B
A
B
D
G
D
G
Fig. 1
A
Step 2:
Place Leg Brace (C) {see fig.2 for correct orientation} in between Legs
(B). Insert Screw 1/4”x35mm (F) with Washer (G) through the ring of
Leg Brace (C) and into Leg (B) {see fig. 2}. Insert Screw 1/4”x16mm
(E) with Washer (G) through additional screw hole of Leg Brace (C)
and into Leg (B) {see fig. 2}. Follow these steps to connect all Legs (B)
with the Leg Brace (C). Tighten all screws that have been left loose
throughout the building process. Turn the table right-side up.
B
B
B
B
C
A
B
C
E G
F G
Fig. 2
table Assembly Instructions
table Assembly Instructions
Summary of Contents for 21946
Page 8: ......
