TCT Mobile GIN One Touch 918, Repair Document

Page: 14 / 23

By NCK Team
GIN/One Touch 918(N/A/D/S) L2 repair document
ED 1.0 GIN Level 2 Repair Document
18/27
All right reserved. Passing on and copying of this document, use and communication are not permitted
without authorization
4.5 Disassembly process evaluation
We list the one touch 918 parts disassembly time, technique levels and disassembly methods as below, for
technique levels, Class 1 signifies easy to disassembly, Class 2 signifies normal to disassembly and Class 3
signifies hard to disassembly.
spare part Time for
disassembly
Jigs for
disassembly
Difficulty
Class
Remark
battery cover 3s Plastic Flake Class 1
Furnished casing with
screws
20 screwdriver Class 1
PCBA 20s Plastic Flake Class 1
Volume key 5S Tweezers Class 1
Power key 5S Tweezers Class 1
Antenna Module 20S Tweezers Class 1
Speaker 10s Soldering iron Class 1
Camera module 10s Camera jig Class 1
volume key FPC 15s Hot wind gun
screwdriver
Class 2
Power key FPC 15s Hot wind gun
screwdriver
Class 2
Receiver 10s Tweezers Class 1
Receiver mylar 10s Tweezers Class 1
PS rubber 5s Tweezers Class 1
Vibrator 5s Tweezers Class 1
LCD Module 20s Plastic Flake Class 2
LCD connector tape
20s Tweezers Class 2
TP FPC tape 20s Tweezers Class 2 Be careful for
main PCBA pad and
LCD FPC damage
BTB connector socket
60s Hot wind gun
Tweezers
Class3 The connector is
easy to be
damaged
RF swithch
60s Hot wind gun
Tweezers
Class3 The connector is
easy to be
damaged
USB connector
60s Hot wind gun
Tweezers
Class3 The connector is
easy to be
damaged
2 in 1SIM card connector 120s Hot wind gun
Tweezers
Class 3 The connector is
easy to be
damaged
audio jack 60s Hot wind gun
Tweezers
Class3 The connector is
easy to be
damaged
flash card connector 120s Hot wind gun
Tweezers
Class 3 The connector is
easy to be
damaged