TCSM CS Series, Product Manual

Page: 19 / 24

Oil mist collector CS series .
19
3-4Maintenance list
Time
Type
Each 300H Each 600H 6000H
CS900-MKI
Filter cotton set Clean Replace
Oil tray Clean
CS900-MKII
Filter cotton set Clean Replace
Oil tray Clean
CS900-PLUS
Filter cotton set Clean Replace
Oil tray Clean
CS1200-MKIII
Filter cotton set Clean
Oil tray Clean
CS2000-MKIV
Filter cotton set Clean
Oil tray Clean
CS3000-MKV
Filter cotton set Clean
Oil tray Clean
Optional Accessories
All type Outlet Filter Replace
The maintenance time is recommended. The actual situation will be slightly changed due to the cutting/milling
condition of the client. The client can judge to reduce / extend the maintenance time according to the suction flow.
3-5 Troubleshooting
Error Possible Causes Solution
Motor do not work
Power is not connect
Check if the power wiring is well
connect
Defective switch / phase
loss
Use a three-use meter to measure
whether there is a phase loss. If the
phase is loss, replace the switch. If
necessary, contact service.
Vibration, strange sound,
odor
Motor wind wheel
abnormal
Check the condition of the motor and
wind wheel, contact service if
necessary
Filter cotton blocked or
damaged
Clean or replace the filter
New product suction is
abnormal
Motor reverse Reverse power phase connection
Poor piping
The pipe is recommended to be
installed in a straight line with less
twists
。
Oil leakage at the exhaust
pipe
Incorrect filter installed Install filter correctly
Filter cotton damaged Replace the filter
Exhaust air flow
significant reduce
（
With Outlet Filter
）
Filter blocked Replace the outlet Filter