25
Resets and Presets
Functionality
CV 201
Value
CV 202
Value
CV 203
Value
CV 204
Value
CV 203
Default
Value
CV 204
Default
Value
Individual Sound Volumes
5
0
0
Reset
or
Preset
Type
2 - 10
0
Varies
Allows you to do several different Factory Resets depending on your needs. You can also call up one of 3
User Presets that you may have saved using
.
User Presets are available in WOWSound decoders starting with Ver 3. They allow you to save 3 versions
of you own sound settings for easy resets to settings other than the factory default values. User presets
can only be setup using
. Enter the value needed from the chart below into CV 204.
Value
Reset Actions
2
All Decoder Settings (Motor, Light, Sound)
3
Sound Button Mappings
4
Individual Volumes
5
Chuff Timing
6
Sound CV’s
7
Sound Type Volumes
8
Loads Preset #1 (ver 3+ only)
9
Loads Preset #2 (ver 3+ only)
10
Loads Preset #3 (ver 3+ only)
WOWSound Brake Operation
The WOWSound Steam sound decoder uses a slightly different type of “Brake” than the TCS Standard
decoders. WOWSound uses a separate “Brake” button (default is Button 7) and a separate “Brake
Release” (default is Button 6).
Every time you press the “Brake” button there is a 20% brake application as well as a random brake
squeal sound. If you continue to press the “Brake” button several more times there is an additional 20%
brake application each time you press the button. With 5 presses of the “Brake” button you are in
emergency and the loco stops very quickly. Anytime that you press the “Brake Release” button you will