2800 Laura Lane • Middleton, WI 53562 | 800.288.9383 | www.tcsbasys.com
6
7
Configuration
Systems and Setpoints
Under the
System and Setpoints tab you can enable or
monitor system settings for the following:
•
Hot Deck/Cold Deck
•
Discharge Zone Control
• Setpoints
•
Smart Recovery
•
Dehumidification
• Space Control
•
System
STEP 1 Click on the desired section to activate the
relevant settings and program the fields.
NOTE:
Discharge Zone Control should be enabled only
if the US5182 is being used as a master controller for a
Ubiquity subsystem with a QD2040 or QD3041 building
controller.
STEP 2 After programming the System and Setpoints,
click on the Write Page button to save the
settings.
STEP 3 (Optional) Click on the Read Page button to make
sure all settings were entered.
