3
2800 Laura Lane
•
Middleton, WI 53562
|
800.288.9383
|
www.tcsbasys.com
3
Configuration
3
TUE
07-04-23
9:00 AM
72F
service
status
fan
switch
system
switch
program
setup
clock
setup
OVERRIDE
COOLER
WARMER
Occupied
Heating
Cooling
Fan
Service
Data/
Program
Building Automation Solutions
TUE
07-04-23
9:00 AM
72F
Locating the Programming Keypad
The SuperSTAT is programmed through a keypad behind the panel on the left side of the cover. Access the keypad by
swinging open the cover panel.
Introduction
Congratulations on choosing the SuperSTAT™ Thermostat SZ1053! The SuperSTAT series of thermostats are feature rich,
multifunction devices providing extensive controls across a wide range of HVAC applications.
Complete the configuration after installation (refer to the
SZ1051/1053 SuperSTAT Installation Manual
for instructions
on mounting the device, wiring the communications network and connecting other devices to the SuperSTAT.) Your
configuration settings will be uploaded to Ubiquity Cloud the first time you make a connection to the site. Alternatively, you
can skip configuring the SuperSTAT via the keypad and perform all configurations via Ubiquity Cloud, or via a PC running
, which is available for download on the
.
NOTE:
When configuring the SuperSTAT via a connected PC, you must first set the SuperSTAT’s address, baud rate, and
temperature scale using the keypad (see
“Programming Keypad Access” on page
If you have any questions regarding your SuperSTAT, do not hesitate to contact TCS Technical Support at 800.288.9383,
ext. 2. Our Technical Support Department hours are Monday – Friday, 7:00 a.m. to 7:00 p.m. (CST).
Display Screen and Keypad
The display screen on the right side of the cover provides at-a-glance information including day, date, time, and
temperature (based on sensor selection and wiring).
Cover panel (shaded)
swings open
