9
Open the device
There is a release mechanism at
the underside of the device. Slight-
ly press into the opening with a
screwdriver.
Now the upper cover can be re-
moved from the underside and
separated from the lower cover.
Lift the upper cover from the two
upper latches.
5-wire special operation
If there are only 5 wires available for
the device, it is possible to operate it
in 5-wire special operation.
Connect the b- and M-wire with one
wire bridge.
Commissioning
!
First install the system completely, then connect it to mains
voltage!
Install the devices of the system completely.
V1 and V2 must not be connected to P-, a- or b-wire. When connect-
ing the video wires V1 (+) and V2 (-) the polarity must be observed.
Check the a-, b- and P-wire against each other for short-circuit.
Switch ON the mains voltage.
Both LEDs are blinking 3 x green. The indoor station is ready for ope-
ration.
