background image

7

EN

OPERATION

Receiving calls

A ring tone sounds.
In case of an incoming call from the front door, the 
video image of the front-door station is displayed 
automatically.
In case of an incoming call from a flat door or ano-
ther indoor station no video image is displayed.

Speaking

Can be executed only in combination with a front 
door station or an indoor station.

1.

Lift up the handset to accept the call.

Third parties cannot listen in to conversa-
tion or see the video image.

Terminating the conversation
1.

Hang-up the handset. The video image is faded 
out.

Call and video image are terminated auto-
matically after 2 minutes.

 Opening the door

1.

Press the blue door release button.

 Function button

Image activation is preset ex works. 

1.

Shortly press the function button to display the 
video image of the front door station (without 
receiving a door call from the front door).

Press the function button repeatedly to 
switch-over between different video images 
from further cameras (if available).

 Activate ring tone mute

1.

Move 

down

 the call OFF switch. No ring tone 

sounds in case of an incoming call.

 Deactivate ring tone mute

1.

Move 

up

 the call OFF switch. A ring tone 

sounds in case of an incoming call.

 Setting the ring tone volume

The ring tone volume can be adjusted continuously 
with the ring tone volume control.

 

 Setting brightness / contrast

Brightness and contrast can be adjustaed manually 
in 8 steps when the indoor station is in standby mode.

1.

Press the function button and the door release 
button simultaneously for at least 8 sec until 
the video image is displayed.

2.

Press the function button to set the contrast. 
The setting is implemented in 8 continuously 
increasing steps.

3.

Press the door release button to set the bright-
ness. The setting is implemented in 8 conti-
nuously increasing steps.

If no button is pressed for more than 8 
sec the indoor station returns to standby 
mode (video off) and the entered settings 
are stored automatically.

Summary of Contents for IVH4222-0140









Reviews: