11
EN
USER SETTINGS
Call volume
The call volume can be changed in 8 steps during an existing speech connection. Turn the volume knob
counterclockwise to increase the volume or clockwise to reduce the volume.
Ringtone level
The ring tone volume can be adjusted in 8 steps. There must be no voice communication. Turn the vo-
lume knob counterclockwise to increase the volume or clockwise to reduce the volume. The ring tone
is played back at the current ring tone volume.
Selecting the ring tone
You can select different ring tones for floor calls, internal calls and door calls from two front-door
stations.
Ring tone selection activated
Terminate the possible existing speech connection. Press and hold the Call OFF button for about 8
seconds. An acknowledgement tone sounds. The green and red LEDs light up. Ring tone selection
activated.
ring tone front-door station
Press the door release button repeatedly to select the ring tones. The last selected ring tone is now
saved.
ring tone floor door
Press the light switch button repeatedly to select the ring tones. The last selected ring tone is now
saved.
Ring tone Internal call
Press the function key repeatedly until the desired ring tone sounds. The last selected ring tone is now
saved.
Ending ring tone selection
Briefly press the call OFF key once. A confirmation tone is heard and the LEDs are no longer lit. The
ring tone selection is now finished. If no key is pressed for 8 seconds, the unit automatically terminates
the ring tone selection.
CONFIGURABLE SETTINGS
only valid for ISH3130 and ISW3130
Receive internal call
The internal ring tone can be heard and the green LED lights up. Briefly press the speech button to
accept the internal call.
Control function for additional functions*
The internal ring tone can be heard and the green LED lights up. Briefly press the speech button to
accept the internal call.
