11/2012
13
TCS TürControlSysteme AG, TCS Hotline Germany: [email protected]
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
PI_ISH3022-uk
1
Initiate
power supply and control unit
shortly press
LED blinks
programming mode of the system is switched on
2
Delete a button
a)
press until the deletion melody sounds
1)
release
3
Programming via voice connection
establish voice connection
to the front-door station
2)
shortly press
the button
…
... a ring tone sounds at the front-
door and indoor station
1)
put down
the handset
4
End
shortly press LED is on
programming mode of the system is switched off *
)
a) Not necessary, if the bell buttons have not been programmed, comp. product information of the front-door station.
1) If there sounds a Progsperr tone instead, the front-door station is equipped with a programming lock.
The programming lock can be deactivated only with the Service Device TCSK-01 or the configuration software
config
o™.
2) Newly developed front-door stations (as of 2009) respond to that with a positive acknowledgement, when the serial
number of the indoor station was received (see product information of the front-door station).
*)
for device specific indication modes of the front-door station see product information of the front-door station
