TCS FBI4500-0100, Product Information

Page: 8 / 16

8 11/2012
TCS TürControlSysteme AG

TCS Hotline: +49 (0) 41 94 / 98 81 188 Subject to technical changes.
FAX: +49 (0) 41 94 / 98 81 29

Mail: hotline@tcsag.de PI_FBI4500-0100.doc 2A
5-wire special operation
5-wire special operation only with
jumper from the b- to the M-wire in
case of max. 3 devices per door
communication system are permitted.
!
The installation of a jumper between the b- and the M-wire is only permitted when ob-
serving several conditions. Regarding a solution for your special project, please con-
tact our technical hotline.
Connect the camera

Please observe the documentation of the manufacturer!
Voltage supply connection
!

The voltage supply of the PTZ camera is not realised via the PTZ camera interface
and not via the TCS:BUS
®
.

The PTZ camera is to supply separately with a power supply unit which is suitable
for the camera.

To connect the special voltage supply, the terminals K Power Kamera can be used
in the FBI4500.
ATTENTION : The terminals K Power Kamera must not exceed 2 A / 26 V!
Note for the connection of more than one interface
!
Max. 16 interfaces and 16 cameras are permitted when using up to 5 video switches at
one TCS:BUS
®
.
Setup the PTZ camera interface as end device

If the device is installed at the end of a TCS:BUS
®
video strand, set the matching resis-
tor!