TCS FBI4500-0100, Product Information

Page: 10 / 16

10 11/2012
TCS TürControlSysteme AG

TCS Hotline: +49 (0) 41 94 / 98 81 188 Subject to technical changes.
FAX: +49 (0) 41 94 / 98 81 29

Mail: hotline@tcsag.de PI_FBI4500-0100.doc 2A
Commissioning
Commissioning the system

Install the devices of the system voltage-free and completely.

The PTZ camera interface is to be connected to the TCS:BUS
®
according to the con-
nection diagram.

Check the a-, b- and P-wire against each other for short-circuits.

Connect the PTZ camera according to the connection diagram.

Switch ON the mains voltage.
The PTZ camera interface is ready for operation.
Storage in case of a voltage breakdown
The data, stored on the EEPROM storage which is integrated into the micro controller is
still available even after a voltage breakdown.
Configuration
Presettings ex works
The device is equipped with an EEPROM which stores the following device settings ex
works:
AS-address camera 1 0
Control function for moving to prepositions 239
Second AS-address for moving to preposition 2 camera 2 deactivated
Automatic Stop protocol deactivated
Camera address 1
Type of PTZ protocol to control the camera Pelco D
Baud rate 2400 Bd
Configuration options
Function Manual
configo
TM
version 1.7.x
Video level x -
Allocate camera AS-address for moving to preposition 1
- x
Train / delete preposition of the connected camera
- x
Allocate control function numbers to each preposition
- x
Allocate 2nd AS-address for moving to preposition 2
- x
Allocate control function number for topstitching between the preposi-
tions
- x
Determine PTZ protocol type (match with the camera type)
- x
Activate / deactivate the sending of the automatic stop protocol, when
activating: set delay
- x
OSD camera menu - x