8
05/2006
win:clip system
The device is fitted with the win:clip system which enables opening and closing without the
use of screws.
Opening the housing
1.
Insert the win:clip key supplied into the small o-
pening in the front panel.
Push the key into the opening up to the stop and
hold it in that position.
2.
Slide the name plate glass slightly upwards until it
jumps out.
3.
Remove the glass.
4.
Remove the win:clip key.
Closing the housing
1.
Insert the win:clip key supplied into the small o-
pening at the front panel.
Push the key into the opening up to the stop and
hold it in that position.
2.
Slide the name plate glass under the front panel.
3.
Press the name plate glass onto the device and
slide it down slightly until it engages.
4.
Remove the win:clip key.
!
Never seal the device using silicon! Condensate must be allowed to drain and evapo-
rate.
TCS TürControlSysteme AG
•
Geschwister-Scholl-Str. 7
•
39307 Genthin
Subject to change without notice.
Phone.: +49 39 33 / 87 99 10
•
Fax: +49 39 33 / 87 99 11
•
www.tcs-germany.com
PI_GB_AVU1_Art0016078_2v0.doc
mi
