CAUTION:
WARNING: Risk of fire or electric shock. LED Retrofit Kit
installation requires knowledge of luminaires electrical sys-
tems. If not qualified, do not attempt installation. Contact a
qualified electrician
WARNING: Risk of fire or electric shock. Install this kit only in
the luminaires that have the construction features and dimen-
sions shown in the photographs and/or drawings.
WARNING: TO prevent wiring damage or abrasion, do not
expose wiring to edges of sheet metal or other sharp objects.
WARNING: Do not make or alter any open holes in an enclo-
sure of wiring or electrical components during kit installation
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT
BRANCH CONDUCTOR
Fig.3 Before the installation
Fig.4 After replacing the LED Tube
Typical Non-Shunted Lampholder
Connect wires directly to these terminals
CAUTION: Use only non-shunted lampholders.
Do not install product in a fixture with shunted lampholders (found in all
fixtures using instant start ballasts). If the current lampholders are shunted,
remove them and replace them with non-shunted lampholders. Make new
connections directly to terminals as indicated above.
