OPERATING THE RADIATOR
Manual Settings using the LED screen
Choose a suitable location for the r a d ia t o r , taking into account the safety instructions above.
ON/OFF BUTTON
Press once to turn the device on. Press again to turn the device off.
This feature can be performed using the TCP Smart App.
MODE SELECTION
Press this button to cycle between the following options:
Press
to enter mode selection. By pressing
, the heating mode runs in a continuous cycle as above:
-
Comfort mode
: Press
and
to set the temperature from 5-35
o
C.
ECO mode
: This is pre-set as 4
o
C below comfort mode.
Pre-programmed schedule
– Select to run the programme as stated below.
-
Anti-frost mode
. To avoid damage to the product during extreme cold weather use anti-frost mode. The heater must
be turned on and Anti Frost mode selected for this function to work. The screen will display
. The target temperature is
7
o
C. The temperature cannot be adjusted.
Pre-Programmed scheduling
- Select to run the programme as stated below.
Programmable scheduling
– Select to create a programme to suit your own requirements.
This feature can be performed using the TCP Smart App.
P1, P2 and P3 Programmed scheduling
–
- Note: Clock and day of the week setting must be done for the below scheduling to work.
(Monday-Sunday) Pre-programmed schedule. Please note: this schedule cannot be adjusted.
-
00:00am – 01:00am
comfort mode,
-
01:00am – 07:00am
ECO mode
-
07:00am – 00:00am
comfort mode.