............................................................................................
33
If necessary, pull out the joint with a pair of tweezers or flat-nose
pliers. Remove the other joint from the link, too.
Remove the link. In the same way, remove further links, as many as
necessary.
If you remove several links, shorten the
strap evenly on both sides, so that the
catch remains in a central position.
Then connect the shortened strap ends.
Insert the joint again and press it well into
place. Then connect the catch and strap
again.
............................................................................................
32
To do so, use the tool provided - and turn the small wheel fully out
with the inserted tool.
There are two more pins in the bottom com-
partment of the tool, which can be inserted into the tool.
The spring pin then has to be inserted again at the desired positi-
on.
REMOVING LINKS
Take the strap apart as described above in
“SHORTENING AT THE CATCH”.
Place the strap into the tool provided and
press the joint in the direction of the
arrow and out, by turning the small wheel
slowly. It should be easy to turn the joint
out. Do not apply force!
Tool
Wheel
English
