background image

4

The lightning flash with arrowhead symbol, within an equilateral triangle is 
intended to alert the user to the presence of uninsulated dangerous voltage 
within the product’s enclosure that may be of sufficient magnitude to 
constitute a risk of electric shock. 
The exclamation point within an equilateral triangle is intended to alert the 
user to the presence of important operating and maintenance (servicing) 
instructions in the literature accompanying the product. 
This symbol indicates that this product incorporates double insulation 
between hazardous main voltage and user accessible parts. When servicing, 
use only identical replacement parts.

Warnings

• To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. This product 

should not be exposed to dripping or splashing. No objects filled with liquids, such as vases, should be 
placed on or near the product.

• The product is unstable if it is not properly placed or mounted to the wall. Be sure to follow the wall 

mounting instructions provided in the user manual to ensur

e your safety.

• Do not expose batteries to excessive heat such as sunshine, fire, and so forth.

• To avoid the danger of suffocation, keep plastic packaging away from pets, babies, and children. 
   Do not use packaging bags in cribs, beds, carriages, or playpens.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT 

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Safety

Make sure you read all the safety information before you use this product. 
TCL ELECTRONICS AUSTRALIA PTY LTD bears no responsibility for accidents or damages caused by 
unauthorized changes, modifications or improper use of the product.
User Manual can be found at  www.tcl.com/au on the specific product page in the “Download” section.

滚滚长江东逝水

Important safety instructions

• 

Read these instructions -

 Read all the safety and operating instructions before operating the product.

• 

Retain these instructions -

 Retain the safety and operating instructions for future reference.

• 

Heed all warnings -

 Adhere to all warnings on the product and in the operating instructions.

• 

Follow all instructions -

 Follow all operating and use instructions.

• 

Do not use this apparatus near water -

 The appliance should not be used near water or moisture 

   – for example, in a wet basement or near a swimming pool and the like.
• 

Clean only with a dry cloth.

• 

Do not block any ventilation openings.

 Install in accordance with the manufacturer’s instructions.

• 

Do not install near any heat sources

 such as radiators, heat registers, stoves, or other apparatus

   (including amplifiers) that produce heat.
• 

Do not defeat the safety purpose

 of the polarized or grounding-type plug. A polarized plug has two blades

   with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
   blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult
   an electrician for replacement of the obsolete outlet.
• 

Protect the power cord

 from being walked on or pinched particularly at plugs, convenience receptacles, and

   the point where it exits from the product. If the cord set is damaged, it must be replaced by a special cord set
   available from the manufacturer or its service agent.
• 

Use only attachments/accessories

 specified by the manufacturer.

• 

Use only with the cart,

 stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

   When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• 

The user must maintain

 a minimum distance of 20CM from the device at all time.

Summary of Contents for S643W





































Reviews: