background image

The following items shall be inspected before occurring failures which require maintenance:

Failures:Refrigerator does not work,The refrigeration e

ect is poor

Causes:1. Check the connection of power supply.  2. Check whether the refrigerator is exposed to 

direct sunlight or whether there is heat source nearby. 3. Check whether there is heat dissipation 

space around refrigerator. 
Remedies:1. Connect the power supply. 2. Move the refrigerator to a place without direct sunlight 

and heat source.  3. Leave sufficient space between refrigerator and wall. 

Failures:Foods in refrigerating chamber are frozen

Causes:1. Check whether the setting temperature is too low.  2. Check whether foods with too 

much water are too close to the rear wall. 
Remedies:1. Adequately increase the temperature.  2. Move the foods with too much water to the 

door side of glass shelf

Failures:There is abnormal sound in refrigerator

Causes:1. Check whether the bottom of refrigerator is stable.  2. Check whether the refrigerator is 

too close to the wall.  3. Check whether the refrigerator touches other objects. 

Remedies:1. Adjust the bottom adjusting leg to stabilize the refrigerator.  2. Leave sufficient space 

around refrigerator.  3. Remove the obstacles. 

Failures:There is abnormal odor in refrigerator

Causes:1. Check whether the foods are sealed for storage.  2. Check whether the refrigerator is 

clean.  3. Check whether the foods are stored for too long time.

Remedies:1. Sealed foods for storage.  2. Regularly clean the refrigerator.  3.Do not store foods 

for too long time.

Non-failures

Phenomenon:Fever or hot on two sides and spacing part surface between refrigerating 

chamber and freezing chamber. 

Cause:Refrigerator pipes (condenser, anti-fog pipes) are on two sides and front part of refrigerator 

for heat dissipation and to prevent from condensation. 

Phenomenon:The door is too tight and not easy to open

Cause:Reopening of the door immediately after closing it is hard because hot air enters the 

refrigerator and contracts to produce pressure di

erence. It is easy to open the door after a while. 

Phenomenon:There is water ripple in refrigerator

Cause:When starting or stopping the compressor, the refrigerant will make such sound;

Water produced after defrosting will also make such sound.  

Phenomenon:There is “Click” sound or tick sound in refrigerator

Cause:Shrinkage and swelling of case will make such sound;When the case is cold or the door is 

opened, this sound will occur;Phenomenon:There is hum sound in refrigerator
Cause:Running of compressor will make such sound (if the refrigerator is not leveled, this sound 

will be louder)

Phenomenon:There is condensation or frosting freezing chamber door surface or food 

surface

Cause:Temperature or humidity around the refrigerator is high;The door is opened for too long 

time;The foods with too much water are not sealed or tightly wrapped

Phenomenon:There is condensation on the built-in light surface

Cause:Light will produce heat after being lit, and the door is opened for too long time. So there is 

temperature di

erence, and thus the light case will have condensation. 

Phenomenon:There is condensation and water mist on body

Cause:Humidity around refrigerator is high, and the moisture in the air will gather in the case to 

form condensation

EN

1

2

Summary of Contents for RP318BXE0

















Reviews: