20
Manual pairing
1
Make sure the Sound Bar and wireless subwoofer are
properly connected to the power supply.
2
Press
PAIR
at the back of the wireless subwoofer until
the amber LED on the subwoofer flashes slowly.
➜
➜
The wireless subwoofer is ready to pair.
3
Press on the top panel of your Sound Bar main unit or
remote control to power on your Sound Bar main unit.
➜
➜
The Sound Bar and wireless subwoofer will pair
automatically.
➜
➜
Pairing is successful. The amber LED remains on
solidly
.
Note
•
If the amber LED at the back of the subwoofer still
flashes after pairing, it means pairing is not successful.
Disconnect the AC power cord from the wireless
subwoofer and then connect again after 3 minutes.
Then repeat steps 1 to 3.
