background image

EN

2

English

This symbol indicates that high voltage is 

present inside. It is dangerous to make any 

kind of contact with any internal part of this 

product.

N

This symbol indicates that the fuse may 

be in the neutral, and that the mains shall 

be disconnected to de-energize the phase 

conductors.

To prevent injury, this apparatus must be securely 

attached to the floor/wall in accordance with the 

installation instructions.
To reduce the risk of RF exposure, the use distance 

of this apparatus should be at least 100cm.
If an outside antenna or cable system is connected to 

the product, be sure the antenna or cable system is 

grounded by a skilled person so as to provide some 

protection against voltage surges and built-up static 

charges.

TV screen

The TV screen used in this product is made of glass. 

Therefore, it can break when the product is dropped 

or impacted upon by other objects.
The TV screen is a very high technology product, 

giving you finely detailed pictures. Occasionally, a few 

nonactive pixels may appear on the screen as a fixed 

point of blue, green or red. This does not affect the 

performance of your product.

Care

Use a glass-cleaning product to clean the screen and 

a soft cloth and mild detergent to clean the rest of the 

set.

Important: 

Using strong detergents, alcohol-based 

and abrasive products may damage the screen.
Dust the vents at the back and sides regularly. Using 

solvents, abrasive or alcohol-based products could 

damage the TV set. If an object or liquid enters the 

appliance, unplug it immediately and have it checked 

by an authorized engineer. Never open the appliance 

yourself since this may put you at risk or damage the 

appliance.

ESD regulation

This apparatus meets ESD performance criteria. 

In case the apparatus does not recover in Ethernet 

connection mode or USB playing mode due to 

electrostatic discharge, user intervention is required.

Bluetooth function notice

Bluetooth®

 technology (if available in your TV) 

uses 2.4GHz frequency thus close proximity to Wi-

Fi access points, routers or microwave ovens might 

interfere with Bluetooth audio streaming. If you face 

Important information

interruptions in audio reception, you should restart 

your Bluetooth device to find frequency with less 

interferences and if you continue to face issues you 

should move closer to TV or increase space between 

TV and source of interferences.
Bluetooth declaration ID: D056959

Hanging the TV set on the wall
Warning: This operation requires at least two 

people depending on your TV dimension.

To ensure a safe installation, observe the following 

safety notes: 
• Check that the wall can support the weight of the TV 

set and wall mount assembly.

• Follow the mounting instructions provided with the 

wall mount. For certain models, make sure to screw 

the hexagonal VESA wall mounting screw bosses 

(and screws) provided with the set into the nuts for 

the wall mount at the back of your set before your 

wall mounting. 

• The TV set must be installed on a vertical wall.
• Make sure to use only screws suitable for the 

material of the wall.

• Make sure that the TV set cables are placed so that 

there is no danger of tripping over them.

All other safety instructions about our TV sets are also 

applicable here.

Multi product user manual

The features described in this manual are common to 

most models. Some features may not be available on 

your TV and/or your TV may include features that are 

not described in this user manual. The illustrations in 

this manual may differ from the actual product. Please 

refer to the actual product.

Device update

Typically, some devices are updated quarterly, but not 

always so specific. Some devices, especially those 

that went on sale more than three years ago, will only 

be updated if a critical vulnerability is found and fixed.

Summary of Contents for P745 98P745K


















Reviews: