TCL MC25P, Operation Manual, Page: 14 / 15

2.AV1/AV2/S-VHS Selection
3.HDTV/VGA Selection
4. Aspect Ratio Selection in HDTV Mode
06
1. Turning on/off the Unit
Basic Operations
5.Picture Adjustments
Press the MENU button to enter the PICTURE menu. Press the UP/VGA button or DOWN/AV
button to make the selection and press the LEFT or RIGHT button to make the adjustments.
Continue.
COLOUR
SHARP
Item
BRI.
D S TON E
Explanation
Improves colour details
Adjustment
ON/OFF
Increases
brightness Decreases
brightness
Decreases
contrast Increases
contrast
Decreases
colour defi-
nition
TINT
Obtains natural skin tones
Enhances
colour defin-
ition
Makes pic-
ture softer Makes pic-
ture clearer
Adds reddish
tint Adds greenish
tint
Adjusts to brighten the darkest
parts of the picture
Adjusts the distinction between
the black and white parts of the
picture
Adjusts to add or reduce the
colour
TINT is not available in PAL
system
BRI. 50
COLOUR 5 0
SHARP 50
TINT 0
D S TONE ON
CONT. 50
This symbol means you can
see more items by pressing
the button.This note is also
applicable to other menus.
STATUS
MILD/ STANDARD/
BRIGHT
CUSTOM/ Toggle among the different modes to
make the picture adjustments
1.
2. Press the MENU button and DOWN/AV button to enter the
SYSTEM menu. Press the RIGHT button to move the cursor
rightward and then press the DOWN/AV button to highlight
SCANMODE 4:3.
3. Press the RIGHT button to select 16:9.
When the input signal is 1080i, 1080P or 720P, the aspect
ratio should be set to 16:9.
Press the DOWN/AV button on the remote repeatedly to toggle between AV1,AV2 and S-VHS.
Press the UP/VGA button on the remote repeatedly to toggle among VGA and HDTV mode.
LANG. ENG.
SCANMODE
ROTATE
C. TEMP AUTO
PALETTE
4:3
50
Turning on: Press the "I" on the POWER button of the rear panel to turn on the unit, then the
indicator lights. After a few seconds, the picture appears on the screen.
Turning off: press the "O" on the POWER button of the rear panel to turn the unit off.