16
Menu Operation
MTS–
This option controls the manner in which
the sound comes through your speakers. Options
available vary according to the input selected.
• Mono (available for regular TV viewing
only) –
This option plays the sound in
mono only. Use this setting when receiving
broadcasts with weak stereo signals.
•
Stereo –
This option splits the incoming
stereo audio signal into left and right
channels. Most TV programs and recorded
materials have stereo audio.
•
Second Audio Program (SAP) –
This
option plays the program’s audio in a
second language, if available. . SAP audio is
broadcast in mono only. SAP is also used
to broadcast a program’s audio with
descriptions of the video for the visually
impaired.
Audio Language–
Press
◄/►
to choose from the list
of languages available for the program you’re watching.
The language chosen becomes your preferred language
for all digital channels until you turn the TV off. If the
language chosen is not being broadcasted with a
program, the TV plays the default language for the
program (usually English in the US).
TV Menu
When you first used your TV you will have setup your TV
for DTV / TV channels using the Initial Setup screens. If
you did not do this or if your setup has changed, you can
do this from the TV menu.
Tuner mode:
chooses the type of signal (
Cable/Sat or
Antenna
) depending upon which equipment you have
connected to the
ANT/CABLE/SAT IN
.
Channel Scan:
selects this item and press
OK
/► to
start channel scan automatically.
(
Note:
If you wish to
stop the search, press the
CLEAR
button.)
When you perform a Channel Scan, your TV searches
for channels with signals and stores the channel
information in the Channel List. Then, as you watch
TV and press
CH+
or
CH-
, your TV goes to the next
or previous channel in the Channel List and skips the
channels that do not have signals.
If the TV signal source changes – for example, if you
change from an outdoor antenna to cable TV – you will
need to rescan for channels.
Channel Skip:
After the TV has stored all of the
available channels in memory you will find that some
channels will be too weak to watch comfortably or they
may be channels you do not want to see, you can hide
these channels in the channel list.
1 press
OK
/► to open Channel Skip menu.
2 use ▲/▼ highlight the channel you wish to skip; then
press
OK
to check the highlighted channel. You
can add the channel back into the Channel List by
highlighting it and un-checking it.
Time Menu
Time Zone
You can set the correct Time Zone for your area.
To choose a time zone:
1. Select
Time > Time Zone
, then press
OK
/► to open
Time Zone screen
2. Press
◄/►
to select the time zone for your area.
3. Press the
MENU
button to go back to the previous
screen, or press the
CLEAR
button to close the
menu.
Time:
press
OK
/► to open Time screen
Auto synchronization:
use ◄/► to select
On
or
Off
. If
On
selected, the TV will get the time
automatically from DTV signals, and the Time item
cannot be adjusted. If you select
Off
, you should
set date and time at
Date
and
Time
item. Highlight
Date
or
Time
, use ◄/► to select input space,
enter the current date or time by using the number
buttons.
Note: if
Off
selected, the time set in
Time
option
will not be memorized when turning on the TV next
time, and the TV 's time will start from the default.
Power on timer:
use ◄/► to select
Once, Daily
or
Off.
If you select
Once
or
Daily
, you should
set a time period after which the TV automatically
switches to on at
Timer
below this item. Highlight
Timer
, use ◄/► to select input space, enter the
on time using the number buttons.
Power on channel:
press
OK
/► to display its
submenu. Highlight
Select mode
, use ◄/► to
select
Last status
, the power on channel will be
the last channel you watched before powered off.
Or you can select
User select
, then press ▲/▼ to
select the channel you want to watch when the TV
is turned on automatically next time, and press
OK
to confirm.
