TCL LCD20VSHN, Service Manual

Page: 11 / 80

20’’ LCD TV TCL LCD20VSHN
11
TV Setting
The following menu appears only in the TV mode.
1. Channel nr: Shows the current channel number.
2. Tuning mode: Select the mode of Cable\ Broadcast.
3. System standard: NTSC-M, PAL-N, PAL-M.
4. Auto search: Select "Auto Search" to search all signaled channel; when the searching is complete, it stays at the
first channel with signal and all channels that have been located are stored. If you would like to stop "Auto
Search" during the process, simply by pressing the MENU button.
5. Fine tune: NTSC-M, PAL-N, PAL-M is seldom used.
6. AFC can be set to ON or OFF. When it is set to ON, the TV will search the TV signal automatically; when there is
any offset in the signal, it will automatically adjust the channel to the correct position.
7. Skip can be set to ON or OFF. When it is set to ON, a channel can be skipped when pressing the CH button on
the remote control or on the front panel.
8. Lock can be set to on or off, when it is set to on, the current channel is locked.
9. Reset to default: Reset to the factory default value.